$69.00
FLAT RATE REPAIR } Model TRC6510MDB } Refurbished Unit } Three Payout Tubes } MDB Mech } 6 Pin } *Please read: In order to use this page you must have done the following: Sent...
FLAT RATE REPAIR } Model TRC6510MDB } Refurbished Unit } Three Payout Tubes } MDB Mech } 6 Pin } *Please read: In order to use this page you must have done the following: Sent...

Discounted
SHIPPING

90 Day
Limited Warranty

ONLINE
SUPPORT 24/7

Discounted
SHIPPING

90 Day
Limited Warranty

ONLINE
SUPPORT 24/7

Availability: Many In Stock
Sku: TRC6510MDB-FRR
Bill Validators
Mars
  • FLAT RATE REPAIR }
  • Model TRC6510MDB }
  • Refurbished Unit }
  • Three Payout Tubes }
  • MDB Mech }
  • 6 Pin }

*Please read: In order to use this page you must have done the following: Sent us the unit listed above that you want a flat rate exchange done to. When sending your unit please track the item so you know when we have received it. Once you know that the old unit is in our possession then you may checkout using the screen above just as if you were purchasing an item. Please send your unit to:

Vending World

9055 Rancho Park Ct.

Rancho Cucamonga, CA 91730

Your flat rate repaired item will then be shipped by USPS, after payment has been received. In most cases you will not get back the same unit you sent in, you will usually get a replacement unit of the same make and model. Should you send a special unit or one that we do not have in stock then your actual unit would need to be repaired. Should we repair your actual unit then a delay of three to five days may occur to allow us time to repair your unit. We do not repair units that have been salted, burned, water damaged or vandalized. If your current unit has any of the damage listed then please do not send it to us. If your unit is beyond repair please see our refurbished units for outright purchase, instead of our flat rate repair service.

Don't be fooled by companies that charge a low labor price, plus parts for validator, coin mech or pc board repair. Many times the parts charge is as much or more than the labor cost. Our flat rate; service provides you with a preset flat rate cost, including all parts and all labor. With our service you will never have any surprises as to what your final repair bill will be.

Your flat rate repaired item will then be shipped by USPS, after payment has been received. In most cases you will not get back the same unit you sent in, you will usually get a replacement unit of the same make and model. Should you send a special unit or one that we do not have in stock then your actual unit would need to be repaired. Should we repair your actual unit then a delay of three to five days may occur to allow us time to repair your unit. We do not repair units that have been salted, burned, water damaged or vandalized. If your current unit has any of the damage listed then please do not send it to us. If your unit is beyond repair please see our refurbished units for outright purchase, instead of our ’flat rate’ repair service.

  • FLAT RATE REPAIR }
  • Model TRC6510MDB }
  • Refurbished Unit }
  • Three Payout Tubes }
  • MDB Mech }
  • 6 Pin }

*Please read: In order to use this page you must have done the following: Sent us the unit listed above that you want a flat rate exchange done to. When sending your unit please track the item so you know when we have received it. Once you know that the old unit is in our possession then you may checkout using the screen above just as if you were purchasing an item. Please send your unit to:

Vending World

9055 Rancho Park Ct.

Rancho Cucamonga, CA 91730

Your flat rate repaired item will then be shipped by USPS, after payment has been received. In most cases you will not get back the same unit you sent in, you will usually get a replacement unit of the same make and model. Should you send a special unit or one that we do not have in stock then your actual unit would need to be repaired. Should we repair your actual unit then a delay of three to five days may occur to allow us time to repair your unit. We do not repair units that have been salted, burned, water damaged or vandalized. If your current unit has any of the damage listed then please do not send it to us. If your unit is beyond repair please see our refurbished units for outright purchase, instead of our flat rate repair service.

Don't be fooled by companies that charge a low labor price, plus parts for validator, coin mech or pc board repair. Many times the parts charge is as much or more than the labor cost. Our flat rate; service provides you with a preset flat rate cost, including all parts and all labor. With our service you will never have any surprises as to what your final repair bill will be.

Your flat rate repaired item will then be shipped by USPS, after payment has been received. In most cases you will not get back the same unit you sent in, you will usually get a replacement unit of the same make and model. Should you send a special unit or one that we do not have in stock then your actual unit would need to be repaired. Should we repair your actual unit then a delay of three to five days may occur to allow us time to repair your unit. We do not repair units that have been salted, burned, water damaged or vandalized. If your current unit has any of the damage listed then please do not send it to us. If your unit is beyond repair please see our refurbished units for outright purchase, instead of our ’flat rate’ repair service.

Why Buy A Refurbished Machine?

Great Returns - Commercial Grade Machines - Affordability


New vs Refurbished

We used to sell new machines as well as reconditioned. We no longer sell new for the following reason: According to a recent survey of vending operators about 93 out of 100 potential vending accounts do not make enough revenue to warrant the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts. Typical cost on new 'commercial grade' machines run as much as: Can drink $3400-$4800, Snack $3600-$4500, Cold food $7200-$8500, as you can see quite high compared to used or refurbished. Priced with mech and validator, typical options, vendor pricing, not including sales tax or shipping in some cases. Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.

Start small and grow as you can afford it.

Many people start in the vending business without much knowledge. This can hurt you financially if you are not careful. All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months. There are two main problems with the small mechanical machines. One problem is the machine does not make change or take dollar bills. The second problem is that the machine will 'work you to death'. Most of these machines hold under 100 products and can only gross $40 to $50 at a time, if the entire machine empties out. This is only the gross, the profit is less than 1/2 of that amount. A full size commercial machine on the other hand usually holds 350 to 600 products and empties out at $250 to $500. Remember you spend the most time driving to the location so you might as well fill 500 products as soon as 50.

Why people choose Vending World?

Welcome to vendingworld.com! We are the largest distributor on the west coast of refurbished vending machines.

Here are few reasons why people choose Vending World:

  • 20 years of trust and still counting: Thank you for making us the largest seller of refurbished and used vending equipment in California 20 years on the internet 1998-2018.
  • Largest seller: We are the largest seller in California, In total sales of used vending machines, refurbished vending machines, wholesale vending machines and vending parts from 2005-2018.
  • Wide variety of brands and models to choose from: We sell vending machines and parts from the following fine manufactures on this site: Automatic Products, Coinco, Conlux, Crane Dixie Narco, Crane National, Mars Electronics, National Vendors, Rowe International, Vendo Sanden.
  • 12,000 square foot facility: We are located at Rancho Cucamonga, a premiere city in the Inland Empire of California -- one of the nation's fastest growing metropolitan areas. Located 37 miles east of downtown Los Angeles..
  • 90 days limited period warranty: All machines on our website come with a 90 day limited parts warranty to give you the piece of mind after the delivery of your machines.

Why Buy A Refurbished Machine?

Great Returns - Commercial Grade Machines - Affordability


New vs Refurbished

We used to sell new machines as well as reconditioned. We no longer sell new for the following reason: According to a recent survey of vending operators about 93 out of 100 potential vending accounts do not make enough revenue to warrant the cost of new equipment. New machines are great if you have high volume accounts, but most people do not have these accounts. Typical cost on new 'commercial grade' machines run as much as: Can drink $3400-$4800, Snack $3600-$4500, Cold food $7200-$8500, as you can see quite high compared to used or refurbished. Priced with mech and validator, typical options, vendor pricing, not including sales tax or shipping in some cases. Please remember 'anyone and everyone' can call their machines refurbished but what does that really mean? Please see our machine ratings page for what we actually do to our machines. Many of our competitors don't even 'clean or paint the inside' of the machines.

Start small and grow as you can afford it.

Many people start in the vending business without much knowledge. This can hurt you financially if you are not careful. All of the machines that we sell are full size, commercial machines. There are many machines that are made that are small, countertop or mechanical coin acceptance. These machines are fine if you are a housewife looking to make a little extra money on the side. We used to sell those type of machines and no longer do. The main reason is that people who were serious about vending would out grow these type of machines in several months. There are two main problems with the small mechanical machines. One problem is the machine does not make change or take dollar bills. The second problem is that the machine will 'work you to death'. Most of these machines hold under 100 products and can only gross $40 to $50 at a time, if the entire machine empties out. This is only the gross, the profit is less than 1/2 of that amount. A full size commercial machine on the other hand usually holds 350 to 600 products and empties out at $250 to $500. Remember you spend the most time driving to the location so you might as well fill 500 products as soon as 50.

Why people choose Vending World?

Welcome to vendingworld.com! We are the largest distributor on the west coast of refurbished vending machines.

Here are few reasons why people choose Vending World:

  • 20 years of trust and still counting: Thank you for making us the largest seller of refurbished and used vending equipment in California 20 years on the internet 1998-2018.
  • Largest seller: We are the largest seller in California, In total sales of used vending machines, refurbished vending machines, wholesale vending machines and vending parts from 2005-2018.
  • Wide variety of brands and models to choose from: We sell vending machines and parts from the following fine manufactures on this site: Automatic Products, Coinco, Conlux, Crane Dixie Narco, Crane National, Mars Electronics, National Vendors, Rowe International, Vendo Sanden.
  • 12,000 square foot facility: We are located at Rancho Cucamonga, a premiere city in the Inland Empire of California -- one of the nation's fastest growing metropolitan areas. Located 37 miles east of downtown Los Angeles..
  • 90 days limited period warranty: All machines on our website come with a 90 day limited parts warranty to give you the piece of mind after the delivery of your machines.

FLAT RATE REPAIRS - Mars TRC6510MDB - NOT AN OUTRIGHT PURCHASE READ BELOW FLAT RATE REPAIRS - Mars TRC6510MDB - NOT AN OUTRIGHT PURCHASE READ BELOW